Always wash and dry with water after using dry mortar equipment

Always wash and dry with water after using dry mortar equipment

Like other mechanical equipment, dry mortar equipment in order to ensure that the equipment can work smoothly, it is necessary to pay more attention to some details, which are easily ignored by many users. In normal use, each person should pay attention to the following points.

In the normal use of the mixer, attention must be paid to the operator's regular inspection and maintenance of the equipment. If abnormal operation of the equipment or a shift in the position of the operating equipment is detected, the power needs to be switched off in time for operation. Check and maintain, after inspection, the correct use and operation.
The degree of mixing of dry mortar equipment is divided into ideal mixing, random mixing and incomplete mixing. When the power supply is suddenly cut off, the material in the mixer should first be discharged and then the machine should be started. The degree of mixing of the materials in the dry mortar plant depends on the proportions of the materials to be mixed, their physical state and characteristics, as well as the type of mixer used and the duration of the mixing operation. Mixers are very poorly flowing, adhere to granular or powdered solids and often require the use of mixing machines with mechanical rotation, pressing, squeezing, etc.
Dry-mix mortar equipment should be placed in a dry, non-corrosive medium to ensure the normal service life of the dry-mix mortar equipment. Dry mortar equipment is generally made of carbon steel and is sprayed with a rust-proof paint. If it has been corroded for a long time. The environment is still prone to rusting.
Always wash and dry the inside of the drum and mixing blades with water after using the dry mortar equipment. Over time, the user can prevent rusting oil on the same surface and on the blade surfaces. If the material on the mixer blades is not cleaned, it will be difficult to clean after long periods of inactivity and the mixing efficiency will be affected by the mixing efficiency and homogeneity. Please ensure that fasteners are not loose after use and that they are tightened promptly. Large dry mortar equipment will use a working platform and solid parts should be checked regularly.
It is strictly forbidden to trap nails, wire and other hard objects in the cement and sand during the feeding process to avoid damaging the machine. Sieve the material before feeding to ensure there are no other impurities. After using the dry mortar mixer for a period of time, check the level of the lubricating oil. Add oil to the observation hole with 30# oil. Lubricant is an important part of the machinery and equipment. If the oil is not replenished in a timely manner, it may cause wear to the drive components, so it is important to check the oil regularly.