Dry mortar equipment storage tank form is divided into vertical or horizontal

Dry mortar equipment storage tank form is divided into vertical or horizontal

Dry mortar equipment storage tank as a supporting ready-mixed mortar storage and mixing equipment, mainly used in the construction site mortar mixing and storage, with easy to use, simple operation, clean and environmentally friendly features sand and gravel aggregate is mainly quartz sand, river sand, crushed limestone, etc.. Before use it must be tested for impurity content and particle size distribution, sand containing impurities must be rinsed and dried, and the humidity behind it must be less than 0.5%. Dried and dried river sand coarse sand (d<1.0 mm) has better fluidity sand with a garden angle particle shape, small stacking angle and a temperature no higher than 70 degrees. These characteristics have an important influence on the selection and design of the dryer and sifter, in addition to the product itself. In addition, the ready-mixed mortar made from this type of sand has good construction properties, and is better than the mechanical sand when mixed with the moisture of the construction machine, pumped and sprayed. The particle size distribution curve should be tested in the formulation test and, where possible, the sand should be sieved by a production sifter to avoid formulation errors.

The dry-mix mortar storage tank consists of two main parts: the storage tank and the mortar mixer. The storage tank is composed of tank body, feeding pipe, anti-dissociation device, dust removal system, exhaust pipe, material level system, discharging device, water filling component, vehicle-mounted mobile device, etc. Dry-mix mortar equipment manufacturers briefly describe the product characteristics: storage tank lining surface is smooth, smooth, the overall structure of the combination of solid, not delaminated, corrosion-resistant, long life. Cementitious materials mainly include cement, gypsum, lime, etc. The use of different cementitious materials will directly affect the performance of the mortar, such as: waterproof, shrinkage and strength. Therefore, the quality of the cement must be tested at the factory to ensure that it is consistent with the requirements of the formulations made in the laboratory. A colour test is also required for white cement. The main active materials are limestone, fly ash and other materials. Most of these blended materials are less liquid than dry sand and are time-dependent, e.g. their bulk density and time dependence in different states of fluidisation, and liquidity varies at different pressures due to the time-dependent nature. These characteristics have to be considered in particular in the design of the silo, the design of the metering and conveying screw and the cleaning required in the process.

Dry-mix mortar equipment manufacturers briefly described the choice of material: tank material can choose carbon steel, stainless steel, ancillary equipment commonly used carbon steel. Storage tank form: vertical or horizontal.
Dry mortar equipment manufacturers briefly described the scope of application: widely used in construction materials, powder, chemical and other industries storage of materials. A production line is composed of many parts, dry mortar production line mainly includes spiral feeder, valve mouth packaging machine, spiral conveyor, filling system and so on, each part is very important, only to ensure the normal operation of each part to efficiently produce qualified mortar putty powder, the following I introduce the dry mortar filling system.

The spiral filling mechanism has very few wearing parts and is robust and durable. The filling mechanism takes the form of spiral extrusion filling and does not blow air into the bag. The original air inside the bag is squeezed out by the filling material and discharged from the specially set exhaust hole near the filling mouth. This prevents air from being blown into the bag and also allows excess air to be expelled from the bag. The weighing table can also be freely adjusted in height and the number of weighs can be set by yourself to meet different bags. Automatic weighing correction mechanism: The automatic weighing correction mechanism will automatically check, compare and correct the results of each weighing, which can ensure accurate quantification.