Dry mortar complete sets of equipment is for mortar such as insulation mortar, anti-crack mortar, bonding mortar, plastering mortar, masonry mortar, plastering mortar, waterproof mortar, polyphenylene particles mortar and other kinds of dry mortar automatic feeding, mixing and crushing, automatic discharge packaging and other integrated equipment. Simple design, small footprint, small investment, fast results, continuous production, high class output, and the use of dual-axis paddle mixer, without destroying the original state of the material, to ensure that the insulation coefficient of the mortar will not be reduced due to the destruction of the shape of the insulation raw materials, to ensure the insulation effect of the product.
It is suitable for the production of medium and small scale manufacturers and is equipped with an automatic packaging system, which shows its superiority. The large proportion of raw materials such as cement can be entered into the premixing bin through the elevator by manual measurement, while the small proportion of valuable masterbatch such as cellulose and gum powder can be put into the admixture hopper by electronic weighing, which is further mixed by the mixer and then automatically measured and packaged by the valve pocket packing machine or open pocket packing machine. Belt conveyor can be used to transport to the finished product stacking area. It has the characteristics of moderate investment, short construction period, fast investment. The investment in equipment is generally between 100,000 and 350,000, and the general output can reach 5-15 tons per hour. 3-5 operators, equipment height between 6-10 metres, covers an area of 20-30 square metres
For a dry mortar plant with an annual output of around 20,000 to 30,000 tonnes, 4-6 raw material tanks are normally used, of which two large tanks are used for bulk cement and fly ash and the remaining small tanks are used for light calcium, heavy calcium, sand, small materials etc. No lifting equipment is required to feed the bulk cement and fly ash into the tanks, relying on the pump truck to pump them in. Light calcium, heavy calcium, sand and small materials need to be lifted into the small tanks using bucket elevators. The clever material distribution system supports a bucket elevator distribution type operation, thus avoiding wasted resources. The metering system, in conjunction with the metering screw, introduces the raw material from the silo into the metering silo and achieves raw material metering by means of data feedback from sensors. After metering, the material is guided through the screw conveyor into the main bucket elevator and lifted to the upper part of the mixer to be mixed in the bin. The silo is pneumatically operated with a large opening door, so that the material to be mixed can be quickly put into the gravity-free mixer to achieve continuous production of dry mortar.
This dry mortar set can produce insulation mortar, anti-crack mortar, bonding mortar, plastering mortar, masonry mortar, plastering mortar, waterproof mortar and polyphenylene granule mortar by mixing different proportions of raw materials. Type: According to the output, it can be divided into: simple dry mortar sets (annual output of 3000-10000 tons) basic dry mortar sets (annual output of 10000 tons-50000 tons) automatic dry mortar sets
The unique structure design of the mixer can effectively disperse polypropylene fibres and wood fibres, which completely solves the problems of segregation and secondary agglomeration of fibres caused by the difference in specific gravity of the materials. The machine can meet the production needs of dry mortar with different performance requirements. For example: masonry mortar. Plastering mortars. Mortars for thermal insulation systems. Decorative mortars and other dry mortars. It is a production project for exterior wall insulation and decorative mortar, which not only has low investment and high efficiency, but also avoids idle equipment and waste of resources caused by too large investment. The equipment has the advantages of small footprint, low energy consumption, easy operation and can be installed directly without foundation. It can produce 3-5 tons per hour and can be operated by 3-6 workers.