Dry mortar equipment production line use is the cause of impurities

Dry mortar equipment production line use is the cause of impurities

In the use of dry mortar equipment production line, how to avoid the use of impurities arising from the problem, as a small and medium-sized dry mortar equipment production line manufacturers, let me bring you to understand!
1. Buy qualified products. If the dry mortar equipment is not qualified, the seal may not be satisfactory. If the seal is not strict, the product may leak, on the other hand, other substances may be mixed into the equipment, so there may be impurities in the product.
2. Good management of raw materials. Dry mortar raw materials can affect the quality of the product. If the raw material contains impurities, it is impossible to avoid the impurities in the resulting product. Attention should also be paid to the storage of raw materials so that other substances do not contaminate them.
3, as mentioned at the beginning of the article, dedicated to the equipment. If two products are to be produced using one set of equipment, the internal cleaning of the equipment and the surfaces of the equipment should be cleaned after the production of the previous product.
4. Do a good job of managing the storage of products at each stage to avoid mixing other impurities into the material.
As a large dry mortar production line manufacturer, it is necessary to pay attention to this issue when the dry mortar production line is put into operation.
1. A solid ground foundation must be installed on the dry mortar equipment at the time of installation, and the loading platform and the height of the loading machine and equipment need to be reserved and adjusted. If the height of the equipment is 2 metres, 3.5 metres should be reserved when constructing the protective shed and the reservation should only be put into production after acceptance.
Secondly, the operator must be professionally trained and can only be certified to work if he has passed an examination and cannot operate without a permit.
Thirdly, the equipment should be checked in advance to confirm that all parts are accessible and if problems are found, they should be repaired immediately.
4. If the equipment suddenly fails during operation, cut off the power immediately, pour the mortar into the mixing drum for maintenance and wait until the fault is removed before continuing production. When the equipment is in operation, please do not use wooden sticks, iron bars or other tools to enter the equipment to clean the material. The power supply must be cut off before operation. When cleaning is complete, lock the switch box and clean the site.
5. Maintain and service the dry mortar production line regularly in order to further improve the service life of the equipment.