Why does powder leakage occur in dry-mix mortar equipment?

Why does powder leakage occur in dry-mix mortar equipment?

In the production and operation of dry-mixed mortar equipment, there are mainly the following easy to leak location.

Dry mortar equipment raw material entrance, that is, in the bucket elevator part, due to direct contact with raw materials in this position, inevitably will occur powder leakage. At the outlet of the packer of the production line. As the dry mortar is transported through the pocket packer, the packer also generates a certain amount of leaking powder when it is loaded. Generally speaking, the quality of the relatively reliable automatic metering packers is not very serious. Mixing bin inlet, dry mortar equipment to mix bin inlet. At the entrance of the mixer, at the entrance of the mixer in the production line.
In addition to the above four aspects, generally large dry-mix mortar equipment in the production process using closed production, the production process of powder leakage is less, generally small dry-mix mortar equipment due to the quality of the inevitable leakage of powder phenomenon. The problem. Therefore, when manufacturers choose dry-mix mortar equipment, it is recommended to use it within the limits of purchasing power and productivity. On the one hand, it ensures less leakage and on the other hand, output and production efficiency will increase.
Dry mortar plants are mainly used for the production of dry mortar for construction purposes. Dry mortars are usually made from dry aggregates (e.g. quartz sand), inorganic cementitious materials (e.g. cement) and additives (e.g. polymers). A granular or powdered substance that is physically mixed and transported to the construction site in bags or blocks and can be used directly after mixing with water. Also known as mortar dry powder, dry mix, dry mix, some construction adhesives also fall into this category. Dry-mix mortar equipment is prone to powder leakage during the production process. Dry mortars play an important role in the construction industry for bonding, cushioning, protection and decoration. It is used in a wide range of construction and decoration projects. Common dry mortar products include dry tile adhesives, dry wall coatings, dry wall mortars, dry concrete etc.