Dry mortar production line operation need to pay attention to what are the problems?

Dry mortar production line operation need to pay attention to what are the problems?

Dry mortar production line should try to keep the weight of the metering box system as light as possible knowledge will be introduced by us to you. Before using the dry mortar production line, try to keep the weight of the metering box system as light as possible, and keep the effective volume as the total amount of various formula materials. Check that the cone angle of the dry mortar line slides freely in the event of poor material flow. Otherwise, it is easy to see that the material has not been cleared in the warehouse and the next step is not possible. Interruptions in the dry mortar line. Check that the joints in the dry mortar line are in order and that the important parts are not worn. If this happens, repair or replace them in time.

Dry mortar lines are large and medium sized machines that are used frequently. In operation, only strict operating procedures can be used to ensure the normal operation of the equipment. So we will look at the issues that need attention when operating a dry mortar production line! When the dry mortar production line starts to operate, it should not be rushed to feed the material. After the dry mortar mixer has reached a certain speed, the batch metering and feeding equipment can be turned on. After feeding, add water or other agitated mixture to mix the material thoroughly. If the dry mortar line is overloaded for a long time, it will vibrate in places. Therefore, the equipment needs to be firmly fixed during use and, if necessary, the equipment should be simply reinforced. The noise of the hydraulic pump: new hydraulic pump initial wear less, simple by the bubble and dust, high temperature when the smooth poor or use conditions overload, etc., will cause adverse consequences, so that the hydraulic pump announced abnormal impact. Pay attention to the adjustment of each valve: full understanding of the pressure control valve, flow control valve and directional control valve, the scale of adjustment and must pay special attention to, or adjust the wrong not only damage the machinery, but also pose a threat to safety.

New machine work within three months should pay attention to the working conditions: during the work of the new machine, should master the working conditions to check, such as the maintenance of the machine parts, whether the screws are loose, whether the oil temperature is abnormal rise, whether the hydraulic oil is soon deteriorated, check whether the use of conditions in line with the provisions. Pay attention to the investigation of mechanical action (on the modified pump): hydraulic circuit planning is not appropriate or poorly made components, in the beginning of the use of the stage is not simple to find, so should pay special attention to the action of various conditions of use revealed.

As we all know, dry mortar equipment is used for the production of construction mortar equipment, small investment, quick results, is an economic and practical small and medium-sized mortar production equipment. It covers a small area, simple operation, low energy consumption and high output. It is mainly composed of mixer, batching device, raw material tank, conveying device, valve mouth packing machine, dust collector and control system. Piping part of the leakage condition: hydraulic equipment piping good or not, in the work of a period of time can be seen, check whether the oil leakage, piping is loose. Pay attention to check the value of the meter class: at any time to investigate the hydraulic circuit of the pressure gauge to show the value of the pressure switch code and other oscillation scenes and stability, in order to find out early whether the effect of the hydraulic circuit is normal.