Dry mortar production line manufacturers can add crushing system and drying system as needed

Dry mortar production line manufacturers can add crushing system and drying system as needed

Dry mortar production line is mainly composed of high efficiency mixing system, storage system, conveying system, lifting system, weighing system, to be mixed system, packaging system, dust removal system, material level control system, alarm system, air pressure system, the whole machine control system, etc.. In addition, the dry mortar equipment manufacturers can add crushing system and drying system according to the needs.

1.Large ready-mixed mortar mixing plant raw material storage tank and conveying and lifting conveying system:.

Dry mortar production line is used to store bulk raw materials, such as cement, fly ash, sand. Our plant adopts domestic common 50 tons or 100 tons cement silo (customer selection) as raw material silo, and generally adopts three kinds of raw material silo for cement, fly ash and sand. Cement and fly ash are loaded by tanker truck, sand is loaded by bucket elevator. Additives raw materials small storage tank, used to store small quantities of raw materials, such as rubber powder, additives and other quantities as required. Lifting and conveying system: all the lifting conveyors of the project are controlled by computer program, and the material is given in time and shut down in time.

2.Sand drying system for large ready-mixed mortar mixing plant.

The system uses a sand dryer to dry the wet sand. The system uses a three-way dryer with an inlaid structure introduced from Germany, with a three-tube sleeve design, saving fuel, electricity and labour, and is used for dry mortar production line systems with large output. For special mortar producers, the amount of sand used is not too large, so it is recommended to buy finished sand, conveying and lifting equipment.

3.Large ready-mixed mortar mixing plant batching device.

Weighing and measuring by the control system according to the set formula automatically feed weighing and measuring each piece of raw material in turn, to achieve automatic batching and automatic unloading. It can automatically measure different raw materials according to the formula, which can reduce labor intensity and environmental pollution, and also ensure the quality of dry mortar products.

4.Mixing system of large ready-mixed mortar mixing plant: the mixer adopts double-shaft paddle gravity mixer, large-capacity mixing bin, short mixing time, high output, high uniformity and small variation coefficient. The finished product bin (screed) mixes the material twice to maintain the uniformity, and at the same time makes the material enter the packaging system smoothly.

5.Large ready-mixed mortar mixing plant discharge packaging system.

There are two ways of discharging: direct transport truck discharging and finished product bagging. The transport truck discharge is generally more efficient and is sent directly to the construction site. Finished product bagging is generally used by dry mortar manufacturers. There are two types of bagging: open bag and valve bag.

6. Dust removal systems for large ready-mixed mortar mixing plants.

Used to recycle dust in the dry mortar production line for the benefit of environmental protection. The dust extraction port is usually located at the top of the cement silo, at the feeding port of the elevator, at the filling machine, etc.

8.Automatic industrial control system of large ready-mixed mortar mixing plant: It adopts advanced PLC programmable automatic control system for intelligent operation and control, which displays the weight of each material in real time and automatically corrects the falling difference.