Ensure the insulation coefficient of mortar, will not be reduced by the shape of the insulation raw materials damage, to ensure the insulation effect of the product, mortar equipment is mainly composed of storage tank, double shaft gravity-free mixer, elevator, to be mixed bin, small bin, finished product bin, packaging scale, bucket lifting machine, dust collector, automatic measurement batching scale bin, frame and so on. So daily to want to dry mortar equipment motor life extension, then at the time of work equipment power must be grounded, after opening the dry mortar equipment needs to be at least five to ten minutes of idle warm-up, hot machine no abnormalities found before production use.
Dry mortar equipment is mainly composed of cement, dry sand, fly ash, thickening powder and other raw materials, dry mortar equipment manufacturers special process mortar also need to add a small amount of additives such as cellulose ether, these powders and granules are stored in storage tanks for production use, wet sand should first be sent through the conveyor to the sifter for screening, and then sent through the conveyor belt to the dry line of the three-way dryer for drying treatment.
There are customers who think that it is not the longer the stirring time the more uniform, is not the stirring time, a long time can be stirred, so that the general dry mortar equipment is okay, but some mortar is really not suitable for a long time to stir, which will damage the product itself, like glass beads insulation mortar stirring time will certainly cause damage to the particles of raw materials, the quality of the stirring also went down.
The storage tank is mainly used to store raw materials, the general capacity of sixty cubic meters, the number of three, used to store cement, fly ash, sand and other materials, dry mortar equipment manufacturers production according to the customer's formula will be cement, fly ash, sand proportionally transported to the batching scale bin.
With today's requirements for environmental protection and civilized construction, the shortcomings and limitations of on-site mortar mixing are becoming more and more apparent, while dry mortar equipment is favored by more and more enterprises because of its advantages in technical performance and social benefits.
In the batching scale bin will be matched with materials sent to the bucket machine, cellulose, rubber powder and other small proportion of precious masterbatch can be measured by electronic scale into the admixture hopper, by the bucket machine will be lifted to the frame above the material to be mixed in the bin waiting to be mixed, and then the dry mortar equipment materials unloaded into the two-axis gravity mixer for mixing, mixed materials from the pneumatic door into the finished product bin, and then by the valve packaging machine for packaging can be The operation is completed, compared with the simple type production line is another step advanced.