Dry mortar equipment belongs to the high frequency use of equipment, in the dry mortar enterprises are very widely used, some enterprises are even 24-hour non-stop production, so dry mortar equipment must do daily maintenance to ensure the normal operation of equipment in production. With the gradual arrival of winter, the temperature gradually decreases, and the lines of the equipment may also be frozen hard leading to breakage, especially in the colder areas of the north. Therefore, the daily maintenance of the equipment is an important daily work, each shift of workers must be strictly implemented after the completion of production, dry mortar equipment in the daily maintenance must pay attention to the following aspects.
1, dry mortar equipment should be placed in a dry and no corrosive media environment to ensure the normal service life of dry mortar equipment, dry mortar equipment are generally used carbon steel and sprayed with a layer of anti-rust paint, if placed in a long-term corrosive media environment or easy to rust.
2, dry mortar equipment used to finish must be barrel and mixing leaves with clean water scrubbing and dry, long-term non-users can be in the same inside and blade surface on the anti-rust oil. If you do not clean the material on the mixer leaves, long-term idleness will be clumped after the show difficult to clean, and then mixed when it will affect the mixing efficiency and uniformity.
3, often pay attention to the use of fasteners are loose, tighten in time. Large dry mortar equipment will be used to work platform, should be regularly checked solid parts.
Dry mortar equipment
4.It is strictly forbidden to trap nails, wire and other hard objects in the cement and sand when feeding to avoid damaging the machinery. It is good to screen the materials before feeding to ensure that there are no other impurities.
5, dry mortar equipment reducer box after using a period of time, to check the level of its lubricant level, timely replenishment to the observation hole can see the oil surface, oil quality of 30 # mechanical oil. Lubricating oil for mechanical equipment is a very important part, if the lubricant is not timely replenished may cause wear and tear of the transmission parts, so check the lubricant regularly.