Dry mortar equipment of 10 had to pay attention to the problem

Dry mortar equipment of 10 had to pay attention to the problem

Dry mortar equipment everyone as long as in the construction mortar industry, is certainly very familiar with it. This type of equipment size, scale, manufacturers, uses, quality, technology are endless. But no matter what kind of equipment there are 10 big issues that need special attention and focus.
1. dry mortar equipment before starting we must pay attention to is: first to open the observation port of each device, discharge port, feed port, etc. to observe, whether there are residues and debris. If there must be a strict removal of it before starting work, in the process of work must be strictly prohibited hands and hard objects and debris into the equipment.
2. To extend the life of the motor of the equipment, the power supply of the equipment must be grounded during the work. After turning on the equipment, it needs to be idled for 5-10 minutes to warm up the machine, and no abnormalities are found in the machine before it can be used for production.
3. In order to ensure the life of the user during the production process, the control switches of each equipment must be protected against leakage.
4. Strictly prohibit non-personnel to test and repair the equipment, as well as debugging work.
Dry mortar equipment
5. After starting the dry mortar equipment, pay attention to the direction of operation of the equipment, and whether it is the same as the prescribed direction, otherwise it will lead to damage to the equipment.
6. After the equipment is put into use, the equipment must be strictly maintained on a regular basis to improve the efficiency and increase the service life of the equipment.
7. The equipment should be installed in a place that is easily ventilated and dry, and the surrounding environment should be kept clean and hygienic.
8. regularly check the tightness of the transmission belt and the screws of the connection parts, and make appropriate adjustments.
9. Dry mortar equipment is a gap mixing equipment, pay attention to the single workload can not exceed the amount of equipment.
10. Strictly observe the empty start of the equipment.