Dry mortar equipment is mainly composed of storage tank, double shaft gravity-free mixer, elevator, to be mixed bin, small bin, finished product bin, packaging scale, bucket lifting machine, dust collector, automatic measuring and batching scale bin, frame and so on. The storage tank is mainly used to store raw materials, the general capacity is 60 cubic meters, the number is 3, used to store cement, fly ash, sand and other materials, production according to the customer's recipe will be cement, fly ash, sand proportionally transported to the batching scale bin, in the batching scale bin will be matched with the material to the bucket elevator, cellulose, gum powder and other small proportion of valuable masterbatch can be measured through the electronic scale into the admixture hopper, after the bucket elevator The materials are then unloaded into the double-axis gravity-free mixer for mixing, and the mixed materials are fed into the finished product bin by the pneumatic door and packaged by the valve packaging machine.
Dry mortar is mainly composed of cement, dry sand, fly ash, thickening powder and other raw materials, special process mortar also need to add a small amount of additives such as cellulose ether, these powder and granular materials are stored in the storage tank for production. The wet sand is first sent via conveyor to the sifter for sieving and then sent via conveyor belt to the three-way dryer in the drying line for drying.