Precautions for mixing and discharging dry mortar equipment

Precautions for mixing and discharging dry mortar equipment

A. Hold on to the packaging of the material to be added (such as woven bags, paper bags and barrels) to avoid falling into the barrel or getting entangled in the dry mortar mixer. If an accident occurs, stop the machine immediately and exclude it. In addition, it is forbidden to pull the machine outwards when it is running to avoid personal accidents.

Second, the stirring shaft should be regularly cleaned up on the paint, where attention should be paid to stop processing, to prevent the sleeve rolled to the stirring shaft accidents.

Third, the mixing shaft in the up or down operation of the staff can not leave the mixer to avoid accidents due to the failure of the lifting position switch.

Fourth, the mixer operator must remember to start the main machine frequently within a short period of time.

Fifth, dry mortar equipment in the process of operation of its mixing station can not be raised to too high a position to prevent the paint oil churning out.

Six, the operator should pay attention to avoid collision between the body and the equipment.

Seven, the mixing barrel should be well connected to the conductive device, grounding to maintain a good state.