The use of dry mortar equipment to often pay attention to the use of fasteners after the loosening

The use of dry mortar equipment to often pay attention to the use of fasteners after the loosening

We use dry mortar equipment to often pay attention to whether the fasteners are loose after use, and timely tightening. Dry mortar equipment will all use the working platform, should be regularly checked solid parts. Dry mortar equipment reducer box after using a period of time, to check the level of its lubricant level, timely replenishment to the observation hole can see the oil surface, the oil quality of 30 # mechanical oil. Lubricating oil is a very important part for mechanical equipment, if the lubricant is not replenished in time may cause wear and tear of the transmission parts, so the lubricant should be checked regularly. It is strictly forbidden to insert nails, wires and other hard objects into the cement and sand when feeding to avoid damaging the machinery. It is good to screen the material before feeding to ensure that there are no other impurities.

If you have any questions about the maintenance of dry-mix mortar equipment, please feel free to contact us. Dry mortar equipment should be placed in a dry and non-corrosive medium environment to ensure the normal life of dry mortar equipment, dry mortar equipment is generally made of carbon steel and sprayed with a layer of anti-rust paint, if long-term placed in a corrosive medium environment or easy to rust.

Dry mortar equipment must be used to finish the barrel and mixing leaves with clean water and dry, long-term non-users can be in the same inside and blade surface on the anti-rust oil. If you do not clean the mixer leaves on the material, long-term idleness will be difficult to clean after clumping, and then the mixing time will affect the mixing efficiency and uniformity.