Because the power supply has incorrect protection equipment, the phenomenon of holding back will occur? If the power protection equipment of the dry mortar equipment is too low, the motor of the dry mortar equipment is likely to trip when the temperature power is not reached, but if the setting is too high, the phenomenon of burning the motor will occur seriously, so the setting of the correct protection power when decelerating the dry mortar equipment motor with the turn is also a major factor.
Because of too much feeding, the operator constantly feeds, resulting in too much material in the mixing barrel, this time open the dry mortar equipment will appear to hold the phenomenon, serious cases will even burn the motor, so we should first open the dry mortar equipment in the feed, dry mortar equipment for sh in the material to reach the set number when the mixer stops feeding, the discharge can be carried out at the same time as the feed.