What is the degree of mixing of dry mortar production line?

What is the degree of mixing of dry mortar production line?

1.The degree of mixing of materials in the dry mortar production line depends on the proportion of materials to be mixed, the physical state and characteristics, the type of mixer used and the duration of the mixing operation.

2. Under normal use of the dry mortar production line, attention is paid to the regular inspection and maintenance of the equipment by the operator. If the equipment is found to have abnormal operation or equipment offset, etc. check and maintain, after inspection, the correct use and operation.

3. divided into ideal mixing, random mixing and incomplete mixing of the three states.

4. When the power supply is suddenly cut off, the material in the mixer should be discharged first, and then start the machine.

5. Mixers with poor fluidity and mutually adherent granular or powdery solids often require the use of mechanically turned and pressed mixers, dry mortars etc.

How should the dry mortar production line be automatically tested:

1. Check whether the appearance of the dry mortar production line meets the requirements. Mainly check the dry mortar equipment spray paint, shape, etc., because the dry mortar equipment belongs to the custom-made equipment, not row of the appearance requirements. If the appearance is not the same as the initial development of the program, to communicate with the manufacturer in a timely manner to solve.

2, with material test machine. Dry mortar equipment installation is completed after the trial with material, this is very important. On the one hand, you can check the operation of the equipment and test whether the equipment is running normally. In the process of trial with material need to pay attention to, trial machine is not a one-time add a lot of material to avoid jamming and lead to motor burnout, should be gradual approach material, is also considered a kind of break-in of equipment.

3, check the integrity of the dry mortar production line equipment. Mainly check whether the dry mortar equipment supporting equipment is installed completely, such as the electrical control box, weighing device and other equipment is installed to check whether the original parts of the electrical control box is complete, so as to avoid problems in the test machine.