How to avoid the consumption of dry-mix mortar equipment?

How to avoid the consumption of dry-mix mortar equipment?

Reducing consumption requires our subconscious attention. According to our experience in the production of dry-mixed mortar equipment, there are several factors that are responsible for this: dry-mixed mortar production equipment will inevitably have different degrees of wear and tear in long-term work, resulting in the loss of equipment in later work. The production efficiency of dry-mix mortar production equipment is reduced, affecting the mass production of the equipment. Adding environmental protection equipment adds to the burden of uncoordinated equipment.

How can the consumption of dry mortar production equipment be avoided? Three main points come from the following.

Firstly, during the production of dry mortar equipment, all materials used meet the production requirements of the equipment and the strength of the materials should be within the range that the dry mortar equipment can handle. Secondly, in the process of mixing the dry mortar, attention is paid to whether the material is mixed with hard objects such as nails, stones and other debris. Failure to do so will cause various quality problems in the dry mortar produced by the equipment and then reduce the probability of mixing less dense materials and the particle size of the product.

Secondly, as the dry mortar equipment will cause unevenness in the mixer silo during the long-term work, the lining tube will be seriously worn, which will seriously affect the normal operation of the dry mortar equipment. Therefore, in order to improve the efficiency of the dry mortar equipment, improve the force of the equipment components, as well as the function of lamination and mixing in the mixing process, can ensure the uniformity of material strength. As much as possible in the production process.

Thirdly, if there are unbreakable objects in the equipment during the operation of the dry mortar equipment, the back pressure plate is used as a component of the dry mortar equipment in order to reduce the damage to the equipment. This reduces the loss of dry mortar.

When working on dry mortar equipment, we can protect the equipment through the above points, so as to reduce the degree of wear and tear of the equipment and effectively reduce the maintenance costs of dry mortar equipment.