Dry mortar production lines-- keep the weight of the dosing box system light

Before using the dry mortar line, try to keep the metering box system as light as possible and keep the effective volume as the total of the various recipe materials. Check that the cone angle of the dry mortar line slides freely in the event of poor material flow. Otherwise, it is easy to see that the material has not yet cleared in the warehouse and the next step is impossible. Dry mortar line interruptions. Check that the joints in the dry mortar line are working properly and that important parts are not worn. If this occurs, repair or replace them promptly.
The dry mortar production line is a medium to large sized piece of equipment that is used frequently. In operation, only strict operating procedures can be used to ensure the normal operation of the equipment. So today we will look at the problems that need attention when operating a dry mortar production line!
When the dry mortar production line starts to operate, it cannot be fed in a hurry. After the dry mortar mixer has reached a certain speed, the batch metering and feeding equipment can be turned on. After feeding, add water or other stirred mixture to mix the material thoroughly. If the dry mortar line is overloaded for a long time, it will vibrate locally. Therefore, the equipment needs to be firmly fixed during use and, if necessary, the equipment should be simply reinforced.
During the production process of the dry mortar line, attention must be paid to whether the material contains stones and metals. If found, it should be cleaned in time to avoid damage to the machinery and equipment. In addition, the inlet should be closed in time after loading. The dry mortar production line is vital for the operation of the empty machine before it starts to run. In the operation of the empty machine, we find that the abnormal situation should be stopped in time.