How to solve the shaking of the motor of dry mortar equipment?

How to solve the shaking of the motor of dry mortar equipment?

Sometimes when using dry mortar equipment, I don't know why the motor suddenly shakes. We have summarized the following points for your reference.
1. the bolt is caused by the damage of the connecting bolt on the motor of the dry mortar equipment.
2. immediately after the spindle, so that the spindle wheel shaft above the motor of the dry mortar equipment is tilted.
3. followed by the chain, the chain on the motor and the unstable front wheel on the motor.
4. then the front rim, the front rim on the motor is too worn.
The causes of motor shaking in dry-mix mortar equipment are the four we have summarised above. If you encounter this situation in the future, it is recommended to find out the causes from the above four aspects and then solve them in time.
The control system of the dry-mix mortar equipment can well handle the automatic control of the entire production process, such as batching, weighing and mixing. It features recipe recording and statistical display as well as database PC monitoring and control. System extensions and network functions with client/server database. With the multi-point security monitoring system, the operator can be informed in the control room about all the basic management modules of the entire production process, from the chronological sequence of the production task list to the invoicing, and the interface simulates the display of the user-friendly design.
The entire dynamic process of the dry-mix mortar plant is intuitive, simple and easy to use. All solenoid valves, contactors, switches, push buttons and other electrical components in the control system are made of domestic and foreign brands. The control system has three modes of operation: automatic, semi-automatic and manual, and features such as over-processing, automatic fault correction and fault diagnosis.
Dry mortar equipment is a mixture of granular or dry sieved aggregates (e.g. quartz sand), inorganic cementitious materials (e.g. cement) and additives (e.g. polymers) that are physically mixed in proportion. In powder form, it is transported to the construction site in bags or in bulk and mixed with water for direct use. Also known as mortar dry powder, dry powder, dry powder, some construction adhesives also fall into this category. Dry mortar acts as a binder, cushion, protector and decorator in thin layers in the construction industry and is very widely used in building and decorative works.