New dry-mixed mortar equipment price running three months to pay attention to the state

New dry-mixed mortar equipment price running three months to pay attention to the state

What should I pay attention to when replacing a new hydraulic pump in the price of dry mortar equipment? Observe the oil temperature change: pay attention to check the high and low changes in oil temperature, find out the relationship between the oil temperature and the external ambient temperature, understand the cooler capacity, oil tank capacity and the surrounding environment, use the conditions to match each other, cooling system troubleshooting can also be traced.
Pay attention to the adjustment of each valve: fully understand the use of pressure control valves, flow control valves and directional control valves, pay special attention to the adjustment range and limits, otherwise incorrect adjustment will not only damage the machine, but also damage the machine. pose a threat to safety.
Pay attention to the operating condition within three months after the new machine is running: check the operating condition during the operation of the new machine, such as the maintenance of machine parts, whether the screws are loose, whether the oil is loose, etc. , abnormal temperature rise, whether the hydraulic oil deteriorates rapidly, check the conditions of use.
Do not increase the load immediately after starting the hydraulic pump: the hydraulic pump must run for a period of time (approx. 10 to 30 minutes) and do not leave the load idle. Especially in very low temperatures, a heating process is required to circulate the hydraulic circuit. Usually add the load and confirm the operation.
Regularly check hydraulic oil changes: check the hydraulic oil for deterioration, discolouration and contamination every month or two to ensure that the hydraulic drive medium is in good condition. Watch out for hydraulic pump noise: newer hydraulic pumps have less initial wear and are prone to air bubbles and dust. Poor lubrication or overfilling at high temperatures will result in adverse consequences and have an abnormal effect on the hydraulic pump.
Pay attention to leaks in the pipes of the dry-mix mortar equipment price: whether the hydraulic equipment is in good condition and after a period of operation, you can see if there are oil leaks and loose pipes. Pay attention to checking the display values of the levels: always observe the display values of the pressure gauges of the hydraulic circuit, the vibration and stability of the pressure switch lights and check that the hydraulic circuit is working properly. Pay attention to the movement of the machine (for improved pumps): during the initial use phase, it is not easy to detect incorrect design of the hydraulic circuit or poorly manufactured parts, so special attention should be paid to the operating conditions . occur under various conditions of use.