Dry powder mixer before and after the operation should pay attention to matters

Dry powder mixer before and after the operation should pay attention to matters

Dry powder mixer after the completion of the operation, do a good job of processing, not only to ensure its operation in the process of the subsequent work, but also to further improve its production efficiency and increase the service life. So what are the treatment measures after the dry powder mixer has completed its work? Firstly, we need to land the hopper in the hopper pit, and if it needs to be raised, use the chain to hold it in place. Secondly, the mixer should be cleaned thoroughly. If the operator needs to enter the cylinder for cleaning, the power supply must be cut off first, but also arrange for someone to supervise the outside, or remove the fuse and lock the electrical box, before the latter operation.

At present, the dry powder mixer in the production of dry powder has been very widely used, and the bearings in the operation also plays a vital role, the operation of the bearings maintenance a little improper will appear mixer leakage phenomenon, we should be more careful to maintain the bearings to make it better operation does not leak powder, why the bearings will leak powder? Horizontal dry powder mixer leakage of powder is a long-standing problem in the production of dry powder, because the dry powder mixer itself is dealing with powder, the production process, dry powder and seal contact, the bearing heats up after the phenomenon of leakage of powder, which is an essential contradiction. Now the effective solution is to extend the oil seal, bearing and powder contact, coupled with regular maintenance maintenance can be considerably extended to ease the life of the bearing seal. This can effectively solve the current dry powder mixer leakage of powder a major problem.

Dry powder mixer after the completion of the operation, do a good job to deal with the work, not only to ensure its safe operation in the process of the subsequent work, but also to further improve its production efficiency and increase the service life. So what are the treatment measures after the dry powder mixer has completed its work? Firstly, we need to drop the hopper into the hopper pit, and if it needs to be raised, use a chain to hold it in place. Secondly, the mixer should be cleaned thoroughly. If the operator needs to enter the barrel for cleaning, the power supply must be cut off first, but also arrange for someone to supervise the outside, or remove the fuse and lock the electrical box before the operation can be carried out.

Electricians should have basic knowledge of electrical safety, including high-voltage, low-voltage, DC and AC electronic technology, etc. They must be licensed to operate and cannot operate independently without training and examination. They should be familiar with the power supply facilities of the workshop power supply system and know the control range and line layout of each main switch and sub-switch.
Familiar with the electric transmission principle of various equipment on the dry mortar production line and the requirements of the production process for electric transmission, familiar with the performance and structure of the control panels, and understand the inspection and troubleshooting methods of common faults. Familiarity with the principle performance of various electrical control facilities on the production line and the impact of electrical control on equipment operation and production processes, familiarity with the structure and location of components of the electrical control system, maintenance and adjustment methods, and methods of checking and troubleshooting common faults. Electrician operators and overhaulers should verify that labour protection equipment and tools meet the safety requirements for insulation before work, and strictly forbid fluke operations to ensure effective and safe operation.

Should be familiar with and master all electrical equipment in the maintenance area under their jurisdiction, should be kept constantly intact, clean and tidy normal and safe operation. According to the progress of the pre-repair plan often supervise the operation of various electrical equipment, found unreasonable operation should be corrected in a timely manner, or to stop the operation, at any time to promote the safety knowledge of the operation of electrical equipment, to ensure the safe use of electricity. It is strictly forbidden to go off duty, sleep on duty, gather on duty or do things that are not related to work. Keep the workplace and the electrician's room clean, all the apparatus should be placed in an orderly manner and kept intact, and the operating equipment should be repaired as soon as possible in case of failure.