Bottlenecks limiting the rapid development of dry mortar equipment

Bottlenecks limiting the rapid development of dry mortar equipment

Dry mortar refers to the dry sieving treatment of aggregate (such as quartz sand), inorganic cementitious materials (such as cement) and additives (such as polymer) in proportion to the physical mixing of a granular or powder, in the form of bags or bulk transported to the site, mixed with water can be used directly after the material. It is also known as dry mortar, dry mix, dry powder, some construction adhesives also belong to this category. Dry mortar equipment in the construction industry to play a thin layer of bonding, lining, protection and decorative role, construction and renovation projects are extremely widely used.
The main factors constraining the rapid development of dry mortar are
1. low level of productivity development
China's large population, abundant and cheap labour resources and low overall productivity level have resulted in a low awareness of quality and efficiency requirements for construction, while most of the production enterprises are small in scale, with backward technology and low product quality. Due to the low price of labour and other reasons, the sale of dry mortar equipment in is still basically based on special dry mortar products. The development of dry mortar is closely related to the level of modernization of building construction, and the modernization of China's construction industry started late, and most of the building construction is still following the practice of unpacking bags and temporary mixing on site. This is very detrimental to the development of dry mortar. From a general point of view, our people's demand for the quality of production and living environment is not high, the importance and urgency of the development of dry mortar equipment awareness needs a process.
Dry mortar equipment
2. The influence of production structure
Although the annual output of cement in China has reached more than 900 million tons, about 80% of the output comes from small and medium-sized enterprises with small production scale and relatively backward equipment. The small quantity of high quality cement and the large production of low quality cement also have an impact on the development of a large number of dry mortar equipment.
3. Lack of strength in macro regulation and control
Although our government has introduced the current policy for the development of dry mortar equipment, but only the temporary means of macro-control, and not into the track of legalization. Local governments at all levels according to the local situation adopted some measures to encourage bulk, restricted bagging is still only administrative intervention, the lack of market conditions under the macro-control mechanism, did not give full play to the role of economic leverage.
4. Insufficient awareness of the development of dry mortar
Due to the lack of strength, breadth and depth of the publicity of the development of dry mortar equipment, so that all people, especially the relevant departments of the development of dry mortar equipment is not enough awareness, and the whole society on the development of dry mortar equipment support rate is also low.