Dry mortar equipment self-test method

Dry mortar equipment self-test method

Dry mortar equipment is dry mortar equipment manufacturers for dry mortar customers to produce equipment, generally small equipment can be guided by the manufacturer by the customer's own installation, and large dry mortar equipment needs to be installed numerous things, such as hoists, work platforms, raw material tanks, etc., the need for manufacturers to arrange for special people to install. Therefore, after the project installation race, are required to dry mortar equipment installation project acceptance, which is also a kind of performance of the manufacturer responsible. At present, all the equipment installed by Hengfei machinery are required to sign the installation confirmation letter to collect the customer's opinion for the feedback of the situation. I hope that customers can refer to the following acceptance criteria to check the installation of their own equipment.

1, check the integrity of the dry mortar equipment. Mainly check whether the supporting equipment of the dry mortar equipment is completely installed, such as the electric control box, weighing device and other equipment is installed in place. The is to check whether the original parts of the electric control box are complete, so as to avoid problems when trying out the machine.

2, check whether the appearance of the dry mortar equipment meets the requirements. The main check is the spray paint and shape of the dry mortar equipment, because the dry mortar equipment belongs to the customized equipment, do not exclude the customer has special appearance requirements. If the appearance is not the same as the initial development of the program, to communicate with the manufacturer in a timely manner to solve.

3, with material test machine. Dry mortar equipment must be installed after the completion of the trial with material, this is very important. On the one hand, you can check the operation of the equipment, on the other hand, you can also test the normal operation of the equipment. In the process of trial with material need to pay attention to, trial machine is not a one-time add a lot of material to avoid jamming and lead to motor burnout, should be gradually add material little by little, is also considered a kind of break-in of equipment.