Does dry mortar equipment break down quickly?

Does dry mortar equipment break down quickly?
Dry mortar equipment belongs to the high frequency use of equipment, in the dry mortar enterprises are very widely used, some enterprises are even 24-hour non-stop production, so dry mortar equipment must do daily maintenance to ensure the normal operation of the equipment in production. With the gradual arrival of winter, the temperature gradually decreases, and the lines of dry mortar equipment may also be frozen hard leading to breakage, especially in the colder areas of the north. Therefore, the daily maintenance of dry mortar equipment is an important daily task that must be strictly enforced by each shift of workers after the production is completed. Dry mortar equipment must pay attention to the following aspects during the daily maintenance.

1, when feeding material is strictly prohibited in the cement and sand caught in nails, wire and other hard objects to avoid damage to machinery. It is good to screen the materials before feeding to ensure that there are no other impurities.

2, often pay attention to whether the fasteners are loose after use, tighten in time. Large dry mortar equipment will be used to work platform, should be regularly checked solid parts.

3, dry mortar equipment should be placed in a dry and non-corrosive media environment to ensure the normal service life of dry mortar equipment, dry mortar equipment are generally used in carbon steel and sprayed with a layer of anti-rust paint, if placed in a long-term corrosive media environment or easy to rust.
4, dry mortar mixer gearbox after a period of time, to check the level of its lubricant level, timely replenishment to the observation hole can see the oil surface, the oil quality of 30 # mechanical oil. Lubricating oil for mechanical equipment is a very important part, if the lubricant is not timely replenished may cause wear and tear of the transmission parts, so check the lubricant regularly.

5, dry mortar equipment use is completed must be barrel and mixing leaves with clean water scrubbing and dry, long-term non-users can be in the same inside and blade surface on the anti-rust oil. If you do not clean the mixer leaves on the material, long-term idleness will be difficult to clean after clumping, and then mixing time will affect the mixing efficiency and uniformity.