How to make the dry mortar production line to produce something more

How to make the dry mortar production line to produce something more

The hidden dangers that may exist in the production of dry mortar production line, users need to do early prevention to ensure production.
Dry mortar is mainly composed of cement, dry sand, fly ash, thickening powder and other raw materials, special process mortar also need to add a small amount of additives such as cellulose ether, these powders and granules are stored in the storage tank for production use. The wet sand is first sent by conveyor to a sifter for sieving and then by conveyor belt to a three-way dryer in the drying line for drying.
The stop bar can be used either as a stop bar or as a handrail. There are various forms of locking of the stopper, either the convenient pin type or the spring t-strike type like a door lock. The spring-impact type has a wedge-shaped bumping head, which can be inserted into the hole after pulling the stop bar into place.
Dry mortar production line with overhead rotating open cockpit, such as self-control brick machine, hydraulic brick machine should be used with, its bandwidth should be about 50mm, should use nylon woven belt, do not use cotton thread belt, plastic belt, artificial leather belt and belt. The strength of the first three is weak and easily damaged, and the belt is easily deformed and broken after being rained on. The belt should be divided into two sections and fixed on the brick machine, and the fixing method must be reliable. If the belt is fixed to a steel seat, it must be fixed with a steel reinforcement plate or buried metal component to ensure its strength.