Dry mortar production line series equipment production line is mainly composed of elevator, premix bin, small bin, mixer, finished product bin, packaging machine, dust collector, electric control cabinet, gas phase balance system. The large proportion of raw materials such as cement can be measured by hand through the elevator into the pre-mixing bin, and the small proportion of valuable masterbatch such as cellulose and gum powder can be measured by electronic scales into the admixture hopper, which is another step compared with the simple type because the mixing machine mixes and then automatically measures and packs through the valve pocket packing machine or open pocket packing machine.
Dry mortar production line production protection methods.
1. dry mortar production line with overhead rotating open cockpit, such as self-contained brick machine, hydraulic brick machine should be used with, its bandwidth should be about 50mm, should use nylon woven belt, do not use cotton thread belt, plastic belt, artificial leather belt and belt. The strength of the first three is weak and easily damaged, and the belt is easily deformed and broken after being rained on. The belt should be divided into two sections and fixed on the brick machine respectively, and the fixing method must be reliable.
2. If the belt is fixed on the steel seat cabin, its fixing place must have steel reinforcement plate or buried metal components to ensure its strength.
3. The stop bar in this form can be used as a stop bar or as a handrail. The locking form of the stop bar is varied and can be either a convenient pin type or a spring impact type like a door lock. The spring-impact type has a wedge-shaped head, which can be inserted into the hole when the stopper is pulled into place.