Ready-mixed mortar equipment carries the burden of site mortar production, and only the operation of the equipment can improve the production efficiency of ready-mixed mortar equipment. Also speed up the progress of the project. All, we should have enough knowledge and understanding of ready-mixed mortar equipment, and constantly sum up experience in actual operation to improve the production efficiency of the equipment. The following points should be strengthened to pay attention to.
Ready-mixed mortar equipment before the official work, to run empty, running before the nosebleed on the transfer pump, reducer, batching weighing bucket, bucket lifting machine, biaxial mixer, finished bin reducer, air compressor and other components of the equipment to refuel. Ensure that the equipment has sufficient lubrication capacity. Turn on the power supply of all the equipment and commission them one by one. Prepare for production. When the bucket elevator, air compressor and dust collector are turned on, turn on the batching scale to start working and lift the material to the bin. Then start the double-axis gravity-free mixer work 3-5 minutes later, start the finished product bin motor, open the double-axis gravity-free mixer valve to put the material into the finished product bin for packaging.
The above is the process of how to operate the equipment. But the following points you should pay more attention to check.
The discharge port of the ready-mixed mortar equipment should be cleaned in time after the packaging is completed, before the replacement of materials. Dry mortar is not cleaned in time to ensure completion, it is easy for the pneumatic actuator parts to be stuck by the dry mortar or even jammed. At the time of the next packaging, the packaging equipment cannot be packaged again or is very unresponsive and cannot guarantee the accuracy of the packaging measurement.
Strengthen the maintenance of the compressed air pressure regulating valve of the ready-mixed mortar equipment, to regularly refuel it, because the lack of oil in the compressed air regulating valve will lead to poor movement of the driving cylinder, affecting the execution of the controller's commands, resulting in errors in metering accuracy and even the misoperation of the execution cylinder.
The work of ready-mixed mortar equipment, that is, can not be separated from the operator's operation, more inseparable from the daily maintenance. Only in this way can we ensure the production of dry mortar equipment.